1 / 2
holder tank bag for Louis Biker Wardrobe Duo
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this holder can be mounted on the edge of the warderobe and snaps into place
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 118
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
These two parts are connected with 2 Spax screws 3.5x16mm screws (or similar), but can also be glued together. Then choose the right position on the wardrobe, turn the holder upwards by approx. 30° and press it down until it is horizontal (clicks into place). - Done.