Destiny Ghost Body Round LED
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I found some LED tea lights on Amazon that could be remote controlled, and I decided to remix the Ghost body to hold…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 53
- Wydruki
- 2
- Wyświetlenia
- 998
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
I found some LED tea lights on Amazon that could be remote controlled, and I decided to remix the Ghost body to hold the new LED. This should work with any 30mm wide round LED light.
It will friction fit snug into the dial, and there should be no friction when sliding into the body front. If it is too tight fitting into the body front, just sand it down a bit, otherwise it's difficult to remove the LED when you need to change the batteries.
This is a remix to fit the following model: https://www.thingiverse.com/thing:747305
Print Settings
Printer:
Creality CR-10
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
15
Category: Props