Magnetic doorstops/latches for V-slot Extrusion enclosures
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic doorstops/latches for V-slot Extrusion enclosures
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I added an OpenBuilds Enclosure https://openbuildspartstore.com/enclosures/ to my CNC Lathe to keep the chips from flying everywhere and to get the doors to latch shut, I designed and printed some brackets that had spots to insert 4mm round magnets that lined up with the steel screws on the aluminum brackets on the interior of the doors. They work very well. The magnets were a tight press fit so no adhesive was necessary. I have included the Fusion360 file for easy modification if needed for different sized magnets. The easiest way to mount them is with drop in T-nuts. 12mm socket cap screws (I used low profile) are needed to mount them (3 per door).