Magnetic Key Holder (mask, tissue, hat,....)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
key holder with a magnet Ø8x2mm inside - 12minutes print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 443
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a two-part key ring with a Ø8x2mm circular magnet mounted on the inside.
You can apply it on any available metal part, if you wish, you can also use double-sided adhesive tape.
You can use it as key ring, mask holder, remote garage door opener.
You can also make it bigger to hang a coat, sweater or hat.
You can carry it in your pocket to use it anywhere.
Printing Instructions:
Layer: 0.2 Quality
6 perimeters
Standard configuration Prusa i3 MK3S
no supports required.
0.04mm slack has already been given to easly mount.
Assembly instructions:
Print both parts, place the circular disc magnet inside part 1 and mount part 2, it will lock the magnet in place. You are ready to place it anywhere you want!!!
magnet used in this sample:
https://www.first4magnets.com/circular-disc-rod-c34/8mm-dia-x-2mm-thick-samarium-cobalt-magnet-0-7kg-pull-p6354#ps_0_6550|ps_1_6552
0.35£ each. buy in oack of 20. Can carry 0.7kg each.