1 / 2
Magnetic Holder for Le Creuset or similar Corkscrew / Sommelier Knife
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A magnetic holder for a “sommelier knife” style bottle opener, with measurements taken of a Le Creuset model.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
Fits two 20*5*2 mm magnets. See attached CAD files to adapt to a different magnet or corkscrew.
Printing instructions:
- use 0.6 mm nozzle with 0.67 mm line width
- use 0.1 mm or 0.2 mm layer height
- biggest flat side facing the bed
- pause at 2.6 mm to insert magnets
- glue magnets down if using a magnetic nozzle
If using a 0.4 mm nozzle, you might want to modify the wall thickness in the provided CAD file to better match your extrusin width.