Creality Bowden Cable Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved Cable Clamp for Creality's Bowden and Hot End Wire Harness
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 77
- Wydruki
- 1
- Wyświetlenia
- 414
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The cable clips that hold the Hot End wire harness to the Bowden Tube on my Creality CR6SE are constantly slipping down to the Extruder. I developed these as a replacement such that they stay in place and don't slip. I used 3 of these clips to secure my harness. Slip over the wire harness first, slide to the desired position and then snap on the Bowden Tube.
I'm sure there are many other printers besides Creality that these would work on. If you make for a non-Creality printer leave me a make photo and comment with printer type. Also, if you like the concept however the dimensions of the clip doesn't work on your printer, leave a comment with the printer type and your dimensions and I'll try and add to accommodate yours.
These are a quick and simple print requiring no supports. I printed in PLA with a wall count of 3 at 0.2 mm layer height. It printed solid with no infill.