Artillery X3 bolt up ribbon cable cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is remix of the excellent X3 cover (thing:6596529) from Bockobg Константин Димитров. He did the hard work.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I prefer a bolt up solution for Artillery ribbon cables. This is the excellent X3 cover (thing:6596529) from Bockobg Константин Димитров and thing:4881286. I basically cut the ribbon connector off both and merged the bolt on style using 3d builder. it's basic but works. A small bit of foam on the inside of the cover tab cushions the cable a little (and aligns it).
You will need to print 1 cover, 2 small grills and 1 large grill.
Printing the cover can be tricky. My advise is to use supports and set it laying on the front face. Use atleast 6 walls and preferably 100% infill. Grills do not need supports.