LTT Screwdriver Case w/ bit storage tweaked for more clearance
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick and dirty remix of Nord1ing's modified LTT Screwdriver case to add 5mm of additional clearance to the top lid
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 525
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I tweaked my case after printing and added 8mm tall spacers (chopped up 7mm hot glue stick i had laying around that I found fit perfect.) to most of the bit slots to allow me to store my LTT bits in them at an appropriate height and also retain 10 slots at the bottom of the case for regular length bits. (I found that the holes were a bit deep even for regular bits, personally I'd like them to be about 2mm shallower)
I found that after a little manhandling of the original lid in testing that the hinge split along the layer lines; I think these need to be both thicker and maybe 50% longer as well as including a third hinge in the middle for robustness (I printed it with matte black PLA, yes i know its a bit weaker)
This is my very first remix with no CAD experience at all so my modified lid that I clumsily carved out in TinkerCAD has some issues from where it imported funny (mainly just the “vein” artifact on the outside near the recess where you open it, see pics) I'd probably recommend that you mod these changes yourself for now, rather than using my defective model.
I've included the model for the LTT Logo from kvanzuijlen's original screwdriver case that Nord1ing modded: https://www.thingiverse.com/thing:5953193
I just snipped the mounting pins off it to make it flat and super glued it to the lid