1 / 2
Lightweight Door Stopper for Balcony  - Minimale Tür-Auf-Halter für Altbau-Balkon-Tür — zdjęcie 1
1 / 2

Lightweight Door Stopper for Balcony - Minimale Tür-Auf-Halter für Altbau-Balkon-Tür

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This needs to be printed in a flexible filament, I designed it for TPU. Unlike many door stops that under the door to…

Ocena
0 / 5
Polubienia
9
Pobrania
49
Wydruki
0
Wyświetlenia
855
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This needs to be printed in a flexible filament, I designed it for TPU. Unlike many door stops that under the door to stop it's movement this design goes into the corner between door and frame which only opens when the door is open.

The model is 20 mm high, the little ring at the side is meant as the handle and you can fix a string there to bind the stopper onto some hook.

Das muß mit flexiblem Filament gedruckt werden, ich habe es für und mit TPU gemacht.
Anders als viele Türstopper, die wie ein Keil unter der Tür liegen und sie so halten geht dies Teil in den Freiraum zwischen tür und Rahmen, der sich beim Öffnen der Tür auftut.

20mm hoch mit einem 10mm hohen Ring, der griff ist und erlaubt, eine Schnur daran zu knoten, sodass man das kleine Teilan einem Haken festmachen kann.

FreeCAD sourcen dabei, kann man sich ggf anpassen.

Category: Outdoor & Garden

Tagi