Bowden Tube Holder Guide for CR6-SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The design seeks to hold the bowden tube straight without additional weight, correct optical sensor failures and works!
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 313
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Designed by me, I was looking for a way to hold the bowden tube straight without affecting the weight of the hotend, fixing any misfires of the optical sensor, and above all, fitting perfectly in the CR6-SE printer. After several days of testing, I can say that this design achieves its goal without negatively affecting the printer, easy to remove without deforming the tube, and above all, quick to print (REQUIRES SUPPORTS TO PRINT!!!). I made two versions to choose from, one with a more robust hotend that hooks onto the entire back area of the hotend and another thinner one with less material.
I printed on PLA, 10% infill, (Tree or normal) supports!!!