1 / 2
TPU Gaskets for Flexible & sturdy phone arm (100% Printed)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU gaskets that go between 3d printed arms.
- Ocena
- 5 / 5
- Polubienia
- 64
- Pobrania
- 297
- Wydruki
- 3
- Wyświetlenia
- 1334
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 3) (Komentarze: 4)Remiksy (0)Kolekcje (90)Powiązane
The texture allowing the arms to connect to each other without rotating began to wear off, so I printed some TPU gaskets that go between the arms connections.
The gaskets can hold the arms and stop them from rotating without any lines or textures and the arm can be adjusted without touching the screws.
The normal gasket is for the normal screws and the small gaskets are for the small screws used with the flex frame/smartphone holder.