1 / 7
Neptune 3 and Neptune 4 plus/max caliper holder and flush cutter holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Caliper holder and a flush cutter holder for neptune 3 and 4 plus and max
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 66
- Wydruki
- 1
- Wyświetlenia
- 839
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (23)Powiązane
One of my most used tools .
So made this Caliper holder and a flush cutter hholder for neptune 3 and 4 plus and max
2 versions of for the flushcutter depending on how thick the bolt in the cutter is
with a ring for a 7mm x3mm magnet but this ring is not needed.
(won't interfere with max height of the printer)
printing upright with tree support for the caliper holder.