1 / 1
T-slot filler for G0704/KC20/BF20 milling table
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of trying to vacuum out your t-slots after a full day of milling? Me too, so I drew these up.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 0) (Komentarze: 2)Remiksy (0)Kolekcje (13)Powiązane
Several different lengths of t-slot fillers to close up your table from swarf. I usually keep 2 vises bolted on the table, with the LH side either covered with aluminum or mounting a rotary table. These slots fit loosely.
Fusion360 model included in case you want to make a tighter fit etc. There are parameters to make some adjustments simpler.
Also included is a end piece, you will need 2 of these.
PLA, 5% fill, top of filler on bed.