1 / 13
3030 T Slot Aluminum Extrusion M3 Nut and Holder — zdjęcie 1
1 / 13

3030 T Slot Aluminum Extrusion M3 Nut and Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows the nut to be placed anywhere in the rail and includes a snap on brace to keep the nut from sliding free/falling

Ocena
5 / 5
Polubienia
5
Pobrania
30
Wydruki
0
Wyświetlenia
187
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This T slot nut is designed to fit standard 3m screws/nuts and hold firm in 3030 T slot aluminum extrusion. The small holes on the top are for fine  tipped tweezers or paper clips to twist the rail nut into place. The nut holder has a slot for prying the nut and holder apart with a small flathead. The hole in the top of the holder is for sliding it around easier. When the nut and holder are snapped together they should stay snug in the extrusion but it should still be possible to push them around.

Print settings

PLA, .4 nozzle, .2 layer height, no brim, no supports. (Standard Prusa mk3 settings)

Print the Nut upright and the Nut Holder on it's side.

Tagi