1 / 1
AN4 Washer Holder — zdjęcie 1

AN4 Washer Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Small washer holder to help feed AN4 washers between control rods.

Ocena
0 / 5
Polubienia
4
Pobrania
45
Wydruki
0
Wyświetlenia
294
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

When you are building aircraft you need to position AN4 washers over a bolt while you are feeding the bolt between control rods, the problem is your fingers are too big to hold the washer and feed it in.

This tool holds the washer for you and is a replica of the tools you can buy for a fair bit of money and the good thing is the design can be resized to fit different sized washers.

Tagi