HSW Hexagon Wall Tile with border
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Largest hexagon-shaped wall tile of HSW that can be printed on Prusa XL in 2 parts.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 149
- Wydruki
- 1
- Wyświetlenia
- 1070
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a “standalone” piece of wall art that also happens to be honeycomb storage wall. Conveniently, the roughly 14in tall area that I needed this to fit into resulted in what is the largest 2-part version that can fit on my Prusa XL.
Note: Be careful when slicing this when printing with multiple colors. There is a bug in PrusaSlicer that results in a bad layer when the model is in certain orientations. If you see this happen after slicing, just rotate the model (180° is usually good) and re-slice.
If you'd like to see how this is made, or make your own larger/smaller version, you can find the source here at Onshape.