100 Count Marker Holder & Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 100 Markers that are around 10 mm in diameter or less.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 818
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This was originally made to hold 100 Crayola Super Tip Markers, but will hold any marker or tool around 10 mm in diameter or less. It can also be scaled to hold larger items.
The bottom portion is slid down the 4 poles on the bottom and glued at the stops. If the fit is a little tight you can sand the holes a little, and I would also get the middle portion almost all the way in place before applying glue. The top portion can then be glued on.
I included a second version with 0.2 mm extra tolerance on all the holes. I had done a test print of a small portion of the original model as a test fit, but my printer wasn't able to repeat the accuracy on ally 208 holes, so I had to do some sanding. The model with extra tolerance has not been tested.
This was printed in PLA with 5% gyroid infill with 0.16 mm layers, but most settings will likely work just fine.