Filament runout sensor mount for Troodon 2.0 Pro - 3 different versions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The printer does not ship with a filament runout sensor mount, so... Three mounts provided. Rear mount and side mount
- Ocena
- 4 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to use my printer the day I set it up, and the printer did NOT ship with a filament runout sensor mount. Found one on printables, but it needed an added pneumatic adapter which I didn't have - so I remodeled it to just hold the PTFE tube directly. Mounts right to the top of the printer in the original hole for the PTFE tube guide screw.
A second model allows you to do the same thing, but with a collet clip to hold the tube secure.
Note- When you use this filament sensor mount, you do not use the gold screw with the round hole at the end of it. Instead, there is a screw hole in the body of the mount meant for a flush M5 angle head screw. (Might be M4, I forget)