Multicolor Prusa Enclosure MK4/3 Steel Sheet Holder, No MMU/AMS/Multitool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steel Sheet Holder from @Pierrick_1484244 modified with some fancy 45° inlays for style.
- Ocena
- 5 / 5
- Polubienia
- 43
- Pobrania
- 155
- Wydruki
- 9
- Wyświetlenia
- 1126
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike

First, print the mk4-steel-sheet-holder-body according to the .3mf. Its just standard PLA, no fancy settings going on. There is a version for use with threaded inserts as well as one without.

Then, you print the inlays in a color you like. There are three different versions of the inlays. I did this because you need to have a good fit between the body and the inlays. They should go in without to much force but they shouldnt fall out. For my printer (mk4, standard settings), the 0.15mm clearence version was the best fit.

Align the insert with the body

And slide it in all thre way down.