The Monolith Dice Tower "Bestagon Edition"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hexagons are bestagons, this makes this tower awesome. The Monolith Hex Dice Tower with new hex pattern and multicolor.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 143
- Wydruki
- 0
- Wyświetlenia
- 1155
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the Monolith Dice Tower, a spaceship style dice tower. Its a huge model, with three internal helix paths for the dice to roll. It comes with hinged trays that fold open.
It's part of the Monolith Dice Towers, but with hexagons to be the bestagon of itself.
The part clearance is 0.25mm and the model is print upside down. There is space to add a liner up to 2mm thick to the bottom of the trays (eva foam works great).
Projekt Files
The 3mf files are colored and supported for the MultiMaterialUpgrade (MMU). But can also be used on single color printers.
Supports
For stability, small supporting bridges connect the trays with the core and ensure print success. Both, trays and core need to be merged (right click: merge) to get perfect print results. These bridges need to be cut after printing to open the trays.
Otherwise the model can be printed without supports, but it's recommended to add some supports to the dice path opening.
I made a 3mf file with presets, paint supports and coloration. The model is split into the core and the trays for easier coloration. Both model files have a thin circle, that is needed for alignment, but so thin, it's ignored for printing.
Working with the STLs
As mentioned before, the model comes in 2 parts, the trays and the core. This is for an easier access to the surface of the core.
To get a complete print, both models need to be put into the same position. Use the position of the model and set the same coordinates for both parts. After painting and setting supports, you need to merge the both models to get the little support bridges to work as one continuous model. But you should save the unmerged version, in case you want to change anything. Breaking the merge, will split all models. There is also an unmerged 3mf with supports.
Disclaimer: The dice in the pictures are my own creation, if you're interested in that, check out my Instagram profile and contact me there. Same for print on demand. I don't have a shop and do commissions and print on demand as my time allows.