Screen Relocate for Ender 3 V3 SE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screen relocate bracket for Ender 3 V3 SE printer (Tilted and not)
- Ocena
- 4,667 / 5
- Polubienia
- 17
- Pobrania
- 142
- Wydruki
- 2
- Wyświetlenia
- 950
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This model is a bracket for relocating the screen of Creality's Ender 3 V3 SE printer. No additional sanding is required. The original screws can be used and the holes are perfectly aligned.
I made this model because I thought that the screen sticks too much out the side of the printer and I also wanted it to be tilted so that I can navigate through the menu easier when I sit from the side of my printer. Now I can set my printer closer to the wall and still see the screen.
In this new location the screen does not get hot from the heat of the bed during my prints, but until now I have only printed PLA with max bed temp at 60 C. When I print with hotter bed temperatures I will inform.
I printed the bracket from PLA and it seams strong and firm enough when I press the knob on the screen. I added the little circles in the corners as small brims 0.2mm thick so that they can break apart easy when finished