Ziplock Bag Storage/Dispenser Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In drawer storage and dispensing of plastic bags
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 232
- Wydruki
- 0
- Wyświetlenia
- 1363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
I made these boxes to hold various size ziplocks in our bag, foil and wrap drawer. The cardboard boxes created a chaos.
Because the drawer is fairly deep I also attached a platform under these boxes to lift them up to a comfortable height so that nothing could be left on top of them when you close the drawer. The platform has some “secret” compartments under the boxes for unusual and seldom used items.
I've included the Fusion 360 CAD files, they are fairly well parameterized so you should be able to make different size boxes.
Prints without support in two pieces that I used epoxy to glue together. The Sandwich size is great for sandwich and “snack” size ziplocks. The quart bag require the bigger size. The Square size can be used for things like twist ties and rubber bands, Square + Quart combined is the same length as my Large/Gallon size in the other model:
https://www.printables.com/model/862592-largegallon-ziplock-bag-storagedispenser-box
Show how these boxes are split:
I used PLA, any rigid material should work. Concentric bottom fill pattern would probably look great. Of course, print the top upside down and the bottom right side up.