Filament Sample Tag for 1/2" EMT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament sample tag to be used with 1/2" EMT, such as in the RepRack.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
After building my RepRack filament rack I wanted a tag showing each color when it is printed, especially for the silk and multi-color filaments. I have seen a few other “tags” or “identifiers” for filament racks, and they were mostly variations of some type of flat plate with text identifying the filament type.
After designing and printing a few of my own flat plate designs, I thought of this as a much simpler solution. I decided I don't care enough to go my original route of using white/black as a second color for text identifying the filament type. I'll deal with that in my spool organization and heaven forbid I have to pull one off the rack and actually look at it to see the details…
This specifically fits ½" EMT as is used in the RepRack. I don't know if you can size it up, or down to fit other sizes. It took me all of 10 minutes to create in TinkerCad, and worked the first time, so probably easier to just make your own if you need a different size.
I print it on my P1S as part of my “test plate” for all new filaments. I use a 0.4mm nozzle, 0.2mm layer height, 3 walls, 2 top layers, 2 bottom layers, Arachne, no support, seams nearest. This ends up as just 3 walls on my prints, with no infill. It uses 2.55g and takes 13.5 minutes, on average. Set cooling and other stuff as appropriate for your filament type.
Adhesion may be an issue on some filaments, and brims don't seem to help. I have found I need to use extra glue stick or hairspray in that area.
Have fun!