Lido Style Female Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Female side of a Lido type mount.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 171
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will need a few supports to print properly. I also recommend using either ABS, ASA, PC or Nylon if this is going to be left in a hot car.
Version 2 of the mount is slightly modified and also includes an optional Proclip compatible spacer.
I printed mine with in Polymax PC with 20% infill and 3 top and bottom layers. If your mounting something heavy you might want to consider 100% infill.
I have also updated this model based on feedback. The original worked with Bleo-3's model but not with the Lido brand mount. The new model should work with both.