GX CS2 Portable PCP Air Compressor Handle and Cord Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts the hose whip to the handle and gives you a place to store the cord.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 1431
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
These parts assemble with a minimum of hardware. You'll need three (longish) zip ties, one 3mm X 20mm screw with nut, and 1 2.5" ¼-20 hex head bolt and thin nut. Remove the cover from the compressor and drill a single ¼" clearance hole for the mounting bolt, no other modifications are needed. I made the original out of PLA, but need to make new parts out of PETG for outdoor use. Keep the infill light 15% to 20% or shrinkage can cause parts to warp off the bed. I used a brim on the handle part as its tall and does not have a great deal of adhesion area on the bed surface. The spool is split into two pieces to allow printing without supports. the lever should be printed on its side, and the handle with the big radius down. Prusa Slicer makes that bit a cinch.
I use my compressor on my quad and also have a removable mount for the front of my truck. Will be posting a video on my YouTube channel “Target Forge” featuring these parts, and the quad and truck mounts. This has been a really nice little compressor for filling PCP airguns directly. If you like this, and find it useful please consider a small donation, either way, it's yours to use freely.
I've also added a terminal protector for the AC power supply. Check out the video here for more on this great little compressor. YouTube -
Compressor - https://amzn.to/3Lst2n
Added some images of the parts made in PETG, I think they look and feel nicer.