Flashforge Finder 2 External Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
External spool holder for Flashforge Finder 2. For up to 54mm hole diameter and 60mm width.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 255
- Wydruki
- 0
- Wyświetlenia
- 853
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
An external spool holder for Flashforge Finder 2 3d-printers which attaches to the back metal plate with the integrated spool holder removed. I've designed it for my Finder 2 but think it will also fit Finder 1.
Print it in the same orientation as it will be mounted, no supports are needed. I'm sucessfully using it with 1kg:s spools printed at only 10% infill but would recommend some higher value just to be sure.
I'm using the printers included filament guide tube and just letting it hang loose at the spool end and it has caused me no problems. You need to turn off the filament run-out sensor in the printers settings as that sensor is mounted in the included spool holder.
Created while learning OpenSCAD.
Including an image of my rough design process.
Happy printing!