Leather Press Hole Punch Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapt hole punching bits to your leather press! No more hammering holes!
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 113
- Wydruki
- 0
- Wyświetlenia
- 1017
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
Cobblers rejoice, no more hammering holes!
These models allow you to adapt ‘Senrog’ brand hole punches to this great little leather press from Amazon. The mechanical advantage the press brings to the table allows much more precision and control during the cutting process. And a lot quieter!
There are two “top” pieces which need to be joined together via m3 threaded insert and screw. Very straight forward assembly. I recommend using lock tight on this and tightening it up pretty snugly.
SETTINGS
MUST be printed at 100% infill for all parts and a really low layer height (0.08) for the top threaded pieces. I recommend PETG filament so it has a bit of flex and isn't brittle. Brim recommended on all pieces due to their small size and intricate details. No supports needed!
PARTS
NOTES
Based on the use of these parts, be prepared for replacement over time due to wear and tear. I've been able to cut many holes in very thick, tough leather (1/8") with no problems other than wear on the plastic parts. I imagine the base plate would be the first piece needing to be replaced due to wear. I recommend printing “back up” pieces for when you do need to replace them!
I have not figured out a way of “clearing” the hole punches yet outside of unscrewing it and pushing them out. This method works for me, so I gave up on the idea of an ejection mechanism of some sort. Although there may be an update in the future that utilizes this feature.