Gridfinity Webbing Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity bins to hold and dispense rolls of webbing, strapping, lashing or ribbons.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easy to print Gridfinity bins to hold your webbing, lashing, strap, ribbons or whatever other flat material you have wound up and without a home. Designed to hold those rolls of material along the edge of a shelf or counter (Feed slot version) or just organized and accessible so that you can see what stock you have available as you sew, craft or otherwise use those flat rolled up materials you have.
Since these would be impossible to stack, there is not stacking lip. I opted not to use magnet holes in the bases as the location I am planning for these they wouldn't make sense. There is nothing earth shatteringly new and exciting here, I just couldn't find anything that looked like it would work well for webbing, as the dimensions vary so much from one roll to another. For your smaller rolls the 2x5x5 should work well.
This is of course based on Zach Freedman's original gridfinity design, solid bins were made using the amazing “Gridfinity Generator” by PerplexingLabs https://gridfinity.perplexinglabs.com .