VESA adapter for DELL Alienware AW3423DW
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a VESA adapter for the Alienware AW3423DW ultra-wide monitor.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 558
- Wydruki
- 5
- Wyświetlenia
- 2061
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only ones I found were models from other people charging $20+ for the printed item plus another $7 or more for shipping and it would take weeks. They were unwilling to sell me just the model, so I designed my own using the measurements provided by Dell's own website and my monitor itself.
In my search, I found many people were missing their adapters as well and loved these models, so I thought I'd make mine available here.
This model supports the 100x100 and 75x75 VESA patterns and uses M4 hardware. It is designed to use the M4 screws that come with the monitor as well 4 x M4 nuts and 4 x M4x25 screws. I'm currently editing my model to include a bit more material to support the center opening, but I honestly don't think it's necessary.
I would print this at 0.2mm layer height and no less than 4 perimeters with a 0.4mm nozzle. Rectilinear infill of at least 50% will yield the strongest part for this type of application as well. I'm using PLA+ filament for mine which should more than support the weight of the monitor with this hardware and an appropriate VESA mount.
If you have any questions, please be sure to let me know.
Edit: Been installed on my monitor for over a year now without failure, so that's nice. :)