Framework Expansion Card Holder with Lid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A variety of holders for Framework Expansion Cards. All models contain the same 3-part structure to mechanically open.
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 226
- Wydruki
- 3
- Wyświetlenia
- 1240
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
Link to full description:
https://community.frame.work/t/travel-expansion-card-holder-with-lid/49662
With outstanding support through Discord, here is v3 of my expansion card case! It is designed to "snap" closed and when open, the cards pop out at a 45 degree angle. It is fully constrained when open, so gravity has no effect on functionality. I have tested with PLA on an Ender 3 (20% infill, supports only on any holder.stl, 0.2mm layers) and it came out perfectly. There are inevitably some kinks that still need to be worked out, so consider this a starting point. The logo is a 0.6mm indent for those who want to try multi-color, just switch out the filament as layer 3 is finishing up!