CYD Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
CYD case with holes for antennas and power button, internal battery compartment and snap in area for charging circuit.
- Ocena
- 5 / 5
- Polubienia
- 66
- Pobrania
- 1209
- Wydruki
- 0
- Wyświetlenia
- 5742
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
Just a case I designed to have a fully portable CYD (USB-C) with external antennas.
The three holes up top are 7mm for an on/off button, and two SMA jacks. The TP4056 charging module I used is a micro USB and it clips right down in. The battery retention area I used two 1100mAh lipo batteries paralleled. Some trimming around the SD slot may be required.
Requires 4x M3x25mm hex head bolts for assembly. Model only needs slim tree supports @3 walls and 0% support density.
The lid measurements are taken from a case design by @mdkendall, I just really liked the fitment of his case on the screen.