Angled spool holder adapter for Voron 2.4 - Prusa bayonet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angled spool holder adapter for Voron 2.4 - accepts any spool holder with a prusa bayonet
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I have a set of spool holders and filament spool adapters that I use across my shop - which are mostly Prusa, and all of the spool holders are the kind that plug into that twist bayonet on the spool holder arm.
This adapter lets you reuse all of my favorite spool holders on your Voron. It mounts in the same place as the original spool holder arm on the back panel. For kicks, I added in a 20 degree offset to make the spool point at the filament runout detector.
How to print - I used PETG, .2mm layer height so the bayonets work, and use 35% gyroid infill with 7 perimeters. For support choose yes, generate supports, then choose snug supports.
Once printed, use a needlenose to pinch the supports out - they come out fairly cleanly.