Siglent SDS8xx VESA mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA is for Siglents too.
- Ocena
- 4,5 / 5
- Polubienia
- 19
- Pobrania
- 125
- Wydruki
- 4
- Wyświetlenia
- 1296
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Instead of printing this one, use the updated model:
The original model remains below in case anyone needs to replace a part for a mount that is already made.
Looking for a new 12-bit scope I saw the new Rigols and liked the idea of the VESA mount, but I preferred the Siglent. This tray is designed for the SDS8xx scopes and provides a secure VESA mount with a handle at the front to move it around. The two halves are sized to fit on a MK3/MK4-sized print base and join together with locating pins and M3 bolts.
The scope is secure on the platform because the feet fit through the base while the handle snaps down over tabs on the back of the mount preventing it from falling forward. A 128mm (5") cabinet handle can be put on the front to move it around. M3 inserts can be put in on either left or right side (or both) to add an accessory tray or probe rack (which I haven't designed yet). M4 inserts are used for attaching the handle and in the VESA 100mm spacing pattern to attach to a VESA mount.
I printed mine in Prusament PETG-CF - probably PLA or PETG would be OK too.