D20 Slot Machine Dice Tower

Step up your tabletop gaming experience with the D20 Slot Machine Dice Tower! This unique 3D model combines the thrill of a classic slot machine with the functionality of a dice tower. With its eye-catching design and practicality, it's the perfect addition to any gaming session. Did I also mention it has a storage compartment for your dice? Neat-o!

Print Settings:

• Body
  • 0.2 layer height
  • 3 walls
  • 10% Infill
  • Bridging enabled
  • No brim
  • No supports
• Spring, Key, Arm, Blocker, D20, Lid
  • 0.2 layer height
  • 3 walls
  • 25% Infill
  • No supports
• Key, D20
  • 0.2 layer height
  • 3 walls
  • 25% Infill
  • No supports
  • Scale if tolerances are too loose or too tight

Assembly Instructions:

1. Print one of each part
2. Insert Key into Blocker (It should hold with friction, use Super Glue if needed)
   • 
3. Insert Blocker into the side of the Body with the Key facing outward.
   • 
4. Insert Blocker all the way and turn clockwise so the key is now vertical. 
   • 
5. Slide the Spring onto the Key and fit the Spring into the slot. (Spring should have slight tension)
   • 
6. Press the D20 onto the end of the Lever. (It should hold with friction, use Super Glue if needed)
   • 
7. Press the Lever onto the end of the Key so the Lever is Pointed up. (It should hold with friction, use Super Glue if needed)