GLAMTIME | Dog potty bag dispenser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stylish and easy to load. Meet GLAMTIME, a dog potty bag dispenser that you can easily strap to your belt loop or leash
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 132
- Wydruki
- 3
- Wyświetlenia
- 912
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Public Domain
GLAMTIME | Dog potty bag dispenser
Stylish and easy to load.
Meet GLAMTIME, a dog potty bag dispenser that you can easily strap to your belt loop or leash.
No need to struggle trying to stuff the outgoing bag into a hole.
Simply slide the bag roll from the bottom into the slit, screw the bottom cap on, and there you go!
The strap prints-in-place into the dispenser.
The bottom cap prints separately.
One dispenser is never enough.
Maybe one to keep in the entry?
And one in your car?
And another tied to your bike, ready to take anywhere?
Print as many as you want.
Mix and match the colours at will!
Happy printing!
DIMENSIONS | Ø 42.5 mm x H 90 mm
Inner diameter: 38mm
max roll height: 62mm
PRINTING | 1h
3D PRINT SETTINGS
All STL files are already oriented properly.
The dispenser prints upside down, the bottom cap prints upright.
Resolution: 0.2~0.3mm/layer or less
(the dispensers in the pictures were printed in 0.2mm/layer)
Infill: 20%
Build adhesion type: None
Supports: None