Potter's Wheel Height Guide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy to use height guide for checking the height of works-in-progress on the wheel
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 73
- Wydruki
- 0
- Wyświetlenia
- 376
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A ceramics friend was using a cut-up PET bottle with rough biro markings on it as his height guide for projects on the wheel (see pic).
I said I'd make him something a bit more bespoke and easier to use……
This improved height guide free-stands on the wheel and has clear and legible markings for easy use.
It can be printed in the filament of your choice - PLA or PETG. If your printer can handle printing with two filaments, then a contrasting colour can be used for the text and height marks (as per the above picture). I've included a ‘recessed text’ version for printers that only use a single filament at a time.
As far a printing specific go:
Material: PLA or PETG - nothing fancy.
Layer height: Doesn't matter.
Orientation: Text side down on plate.
Perimeters: Two
Infill: Grid @ 15% will be plenty as the model carries no load and simply sits on the wheel to be gazed at momentarily.