1 / 2
Modular Winder Spool Frame 2 Base for 180mm Mini Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Split version of the Modular Winder Frame 2 base so that the project can be completed on 180mm mini printers.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 288
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple split of the 220mm base from @STORM DESIGN's Modular Winder Frame 2 so that the project can be completed on mini printers with 180mm beds like the Prusa Mini, Bambu A1 Mini, Voron Micron, Rat Rig V-Minion, etc.
No glue required - when the project is assembled, the two pieces will be joined together by the other bolts.
Notes:
- The 220mm version of the base was chosen for compatibility with the Stand for Bambu Lab Filament Spool Switcher & Winder
- There is a 0.15mm clearance between the locking tabs and keyholes. You can test your printer using the included FIT_TEST_Modular_Base_220_Split.stl (It worked for me using PLA+).
- The other large piece in the project (Winder Spool Frame 2 - Arm Gear) already fits a 180mm bed. In the slicer, rotate it around the Z axis by 7.61 degrees so that the angled edge is parallel to one side of the bed (turn OFF skirt and brim to fit).
