Clip/holder for drying Deuter/Source Bladder and food storage bags
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip/holder for drying Deuter/Source Bladder and food storage bags hanging from your kitchen cabinet.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 455
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Use strong double sided adhesive tape to mount the clip at the bottom side of your kitchen cabinet (I used "Pattex kleben statt bohren").
In the Clip you have five slots. To of them are made to slip the Deuter/Source Bladders in. The are a little bit wider than the other three. Into the tighter slots you can attach thin food storage bags to dry them.
At the outer sides of the clip are two wide channels where you can clip in the hose of the Deuter/Source streamers.
The Fusion 360 file is modular, so you can create your own combination of wide/tight and channel slots.
To widen the bladders while drying you can use my other thing: https://www.printables.com/de/model/553875-source-deuter-bladder-dryer-3l
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Infill:
15%
Filament: PETG
Category: Household