Sibeera - the simplest beer rack EVER!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Put it in your fridge, so bottles stop rolling around. Fits 3 standard (longneck) 0.33l beer bottles or 3 0.5l bottles.
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 167
- Wydruki
- 4
- Wyświetlenia
- 1281
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Meet Sibeera - the simplest beer rack EVER!
Put it in your fridge, so bottles stop rolling around. Fits 3 standard (longneck) 0.33l beer bottles or 3 0.5l bottles depending on the version printed.
I really love what you can do with spiral vase mode - This thing is meant to be printed FAST!
In case you really want to ramp up the speed, due to the hefty line width you can easily go for a layer height of 0.5mm and the max speed your hotend allows without extruder skipping.
My fastest still good looking print for this (0.33l version) was in under 20mins!
To be printed using
- spiral vase mode
- (even with a 0.4 nozzle) line width of 1mm
- no top or bottom layers
- layer height of 0.3 or more
Can as well be printed with standard profiles - the smaller one using draft profile then takes 59 min though.