Parcel shelf insert for 1st gen citybugs (Aygo/C1/107)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A quick fix for the typical loose parcel shelf issue these great little cars have. Print two of these from PETG.
- Ocena
- 4 / 5
- Polubienia
- 5
- Pobrania
- 58
- Wydruki
- 1
- Wyświetlenia
- 426
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Print two of these from PETG or another tough filament. Should just slide into place in the cutouts where your parcel shelf rests on its pivots. This is designed for the variant with larger pivot pegs, if someone wants an equivalent design for the smaller pegs some of these cars have, please send me a measurement of the diameter (and measurements of the cutouts in the parcel shelf if that's also different)
Designed for a layer height of 0.24mm. I used organic supports for the floating face, but you could also use regular supports if you don't mind removing supports from two surfaces.
Update: Added a V2 that has a wider upper ‘deck’ to make supporting easier, and in a range of angles to suit variations in parcel shelf molding.