Raspberry Pi 4B Snap Fit Multicolor Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap fit design case to hold the Raspberry Pi 4 B from Amazon without the need for any hardware.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Snap fit design case to hold the Raspberry Pi 4 B from Amazon without the need for any hardware. You can split the file into parts to have the red and green for the Raspberry Pi logo.
Some of the features I had in mind for this design
- low profile
- lots of air flow while still being sturdy
- red and green power lights still visible
- removable GPIO cover so you can protect the pins if not in use
- easy access for SD card
Case can be removed and added without removing power (or any other connections on the side I believe) I have tested this to fit the connection from the Official USB-C Raspberry Pi 4 PSU
This is a work in progress because I do not have the equipment to test the mini HDMI plug fit or the ribbon cable connections on top. If someone prints this and can test these please let me know!
Recommend to print in PETG or another plastic that would be more flexible than PLA.
I used