Ergonomic Lock Holder for Abus 55/40 Padlock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a holder to make holding an Abus 55/40 a bit less cramp-inducing while practicing lock-picking with one. Stays in…
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 325
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Just a holder to make holding an Abus 55/40 a bit less cramp-inducing while practicing lock-picking with one. Stays in via friction-fit, but easy to remove as well. Has a stop to catch the chamfer on the lock to keep the lock from going all the way through the holder.
Abus-55-40-holder.stl* - Basic holder, covers the lock-body only.Abus-55-40-Holder-V2 - Covers most of the shackle as well so more fingers can hang-on. When opened, the shackle can be easily pressed-down to re-lock it. **Abus-55-40-Holder-V2-w-shackle-cut.stl - Same as V2, except has cut-outs that allow the shackle to swing in either direction to allow, for example, putting the keys on/off the shackle.
Print Settings
Printer Brand:
Monoprice
Printer:
Maker Select
No
Supports:
No
0.2 (Adaptive layers work well for this if your slicer supports it)
Infill:
15%
Made on Tinkercad: https://www.tinkercad.com/things/4n7qieQhTKX
Using this model of the lock body: https://www.tinkercad.com/things/66pnb1uDAWb
Category: Hobby