Pixelated 20739 Centerstage Spintake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
4 stage spintake using 1/8ID 3/8OD tubing and standard REV parts
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
4 stage spintake using 1/8ID 3/8OD tubing (https://www.andymark.com/products/1-8-in-id-3-8-in-od-black-surgical-tubing) and standard REV parts. Printed in PETG. Used epoxy, brackets (mounted on the underside), and 3M double sided tape (for the brackets) to bring both pieces together. You can use the “spinner v7” if you want all of it to be 4 spinners per stage, but there is also the option of “spinner v5" in combination with spacers for a custom amount. We chained it up to a motor, but assembly past the spinners it up to discretion.
There are 3 ways to print the main ramp, the whole piece (for large printers), individual pieces in individual files (fits most standard size printers), and 2 pieces in the same file (just to have). I suggest printing in tree support as well. Other than that, the two pictures should provide enough reference for construction, but if not, I have comments and messages on, so feel free to send something there!
Happy building!
-Team Pixelated