Qidi Series3 Cable Chain Clips (X-Max 3 / X-Plus 3 / X-Smart 3)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick remix as I wanted an opening to be able to remove the PTFE tube, similar to the one on the printer by default.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 572
- Wydruki
- 4
- Wyświetlenia
- 1546
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original model worked but I wanted to have a chain clip with an opening like the one on the printer so I could take out the tube without having to pull it out.
Redrawn without the side brace and created two version:
- Version remix_base is designed to be similar to the base chain clips presents on the printer. (2.8mm opening for the tube, 4mm thick)
- Version remix_alternate is designed with the top closed but an opening the mid section. (4mm opening). This makes it like a quick install.
May 06 update: I've added versions with the side reinforcement as per original model. I noticed my clips were a bit too flexible depending the position(/material). It didn't break or fell off but I was not a fan of the clip visually spreading. Still flexible but brace version are a bit more stiff.
Step files only as they are directly accepted in Qidi Slicer and Orca Slicer.
For example I've place one at the end of the chain so when I top feed I can hold the the tube somewhat in place instead of removing it from the chamber.