Mountain Dice Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Large Dice Tower with Door and Magnetic Lift Off/Swivel Top
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 375
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this dice tower last week not for dice but for rocks for a board game i'm creating. It works really well, I've modified the file to have more space to fit dice. The attached model is for dice not rocks.
Print Settings Mountain BASE:
Layer Height: 0.2mm
Perimeters: 3
Solid Layers: Top 5, Bottom 4
Infill: 5% Rectilinear
I wanted to capture the dice one by one but if you'd like them to flow you can remove the edges.
Print Settings Mountain TOP:
Layer Height: 0.2mm
Perimeters: 3
Solid Layers: Top 5, Bottom 4
Infill: 10% Grid
Print Settings DOOR:
Layer Height: 0.05mm
Perimeters: 3
Solid Layers: Top 5, Bottom 4
Infill: 100% Rectilinear
No Supports Required.
Requires 6 Round Magnets - 1.75mm x 5mm, Alternatively you could print some pins and just make it sit in it but with these magnets you can swivel the lid around without taking it off.