1 / 1
Micro Swiss NG Revo 5015 + ADXL345 mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Slight modifications to suit my setup: ADXL345 mount, bigger screw hole for 5015
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 397
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
slight modifications just to make my life easier. I didn't have an m3 screw that was long enough to mount the fan, so I made a hole to fit an m4 screw. Also added a small mount to add an adxl345 above the hotend fan. Everything else is untouched. I put this shroud on my ender 3s running a revo ng.
