Polymer Creep Analyzer / Vorrichtung zur Analyse des Kriechverhaltens bei Kunststoffen
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The tool enables the investigation of the creep behaviour of plastic samples.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution
The tool enables the investigation of the creep behaviour of plastic samples.
The measuring device is placed on two beams that are 65 mm apart. The ruler (e.g. KS-Tools 300.0101) is then attached to the measuring device. Now place the sample next to the measuring device. Finally, a zero adjustment is carried out on the measuring device. The sample is then loaded with a weight and the deflection of the sample is read at regular intervals.
----------------------------------------------------------------------------------------------------------------
Das System ermöglicht die Untersuchung des Kriechverhaltens von Kunststoffproben.
Die Messvorrichtung wird auf zwei Balken, die sich in einem Abstand von 65 mm zueinander befinden, gelegt. Im Anschluss wird das Lineal (z. B. KS-Tools 300.0101) in der Messvorrichtung befestigt. Nun wird die Probe neben die Messvorrichtung gelegt. Schließlich wird an der Messvorrichtung ein Nullabgleich vorgenommen. Im Anschluss wird die Probe mit einem Gewicht belastet und die Durchbiegung der Probe in regelmäßigen Abständen abgelesen.
The device was developed by Lukas Holzner as part of his bachelor's thesis.