Elk On The Trail - Hueforge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snowy delight!
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 639
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Standard Digital File License
This Hueforge is based on a picture I took in Åre while riding a Skidoo up a trail. An elk appeared and stopped and stared at me, shortly followed by her children who crossed the trail behind her, and vanishing off into the white.
Fyrby Additive holds a commercial Hueforge license.
Colours
I used the following colours in this print, but any black, white, light grey and dark blue will probably work:
- PLA BambuLab Basic Black
- PLA+ eSun Dark Blue
- PLA BambuLab Basic Gray
- PLA BambuLab Basic Jade White
Printing
There is a pre-configured 3MF for Bambu studio. Non-Bambu users can use the 3MF in conjunction with the Hueforge describe information to achieve the prints.
This Hueforge is setup to use a 0.2mm nozzle and expects a 0.1mm bottom layer and a 0.08mm layer height with 100% infill and 1 wall.