Playdate Cover simple stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Playdate as a desk-clock - uses the first party cover to holster it in place
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 356
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Hi!
I recently received a panic playdate, and loved the aesthetics of the clock.
I had a browse of the available models and none of them seemed to do a simple stand without additonal material requirements.
The cover which came with it works well but I wanted to ensure it wouldn't slip off my desk shelf so I made this simple model with grooves in it to seat the cover in nicely, and angle it nicely.
STEP and freecad files attached with before/after fillet in case you wanted to amend or remix.
I printed it with a Bambu P1S, using a 0.6mm nozzle at 0.18mm and 10% gyroid infill. Good enough!
No idea how it will hold up if/when the cover loosens up, will update here if it gets weird.
Cheers!
-j