Pogo Pin Holder for Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of a configurable pogo pin holder that can be mounted onto a clip I found on the internet.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 513
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
I needed a pogo pin clip and liked the ability to set the number of pins with https://www.printables.com/model/51522-pogo-pin-serial-adapter-customisable, but wanted to add it to a clip rather than hold it in place by hand.
The clip used can be found at https://github.com/puzrin/pogo_pins_clip; I printed it at 100% in PETG infill for strength, but not sure if that was necessary or not.
The pogo pin holder I also printed at 100% in PETG with supports with the added mount on the build plate.
I've included an 8 pin and a 5 pin version for printing (the two I most commonly need), but you can adjust the number of pins by editing the OpenSCAD file and adjusting the value of ‘ppc’.